Journal > International

• Sangrok Jin, Jihoon Kim, Seokwoo Lee, Jongwon Kim, TaeWon Seo, "Empirical modeling of rotating thruster for underwater robotic platform," Journal of Marine Science and Technology, vol. 20, no. 1, pp. 118-126, 2015.03.

• Hee-Do Jang, Jongwon Kim, Dong-Chul Han, Dong-Young Jang, Hyeong-Joon Ahn, "Improvement of high-speed stability of an aerostatic bearing-rotor system using an active magnetic bearing," INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol. 15, no. 12, pp. 2565-2572, 2014.12.

• Sungmin Nam, Jongkyun Oh, Giuk Lee, Jongwon Kim, TaeWon Seo, "Dynamic analysis during internal transition of a compliant multi-body climbing robot with magnetic adhesion," JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 28, no. 12, pp. 5175-5187, 2014.12.

• Jong-Won Kim, Seunmin Jung, Jinuk Kim, Jongwon Kim, TaeWon Seo, "Optimal design of the front linkage of a hydraulic excavator for multi-objective function," JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 28, no. 8, pp. 3103-3111, 2014.08.

• Heonyoung Lim, Yeonsik Kang, Chanhwan Kim, Jongwon Kim, "Experimental Verification of Nonlinear Model Predictive Tracking Control for Six-Wheeled Unmanned Ground Vehicles," INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol. 15, no. 5, pp. 831-840, 2014.05.

• Taijong Sung, Donghun Lee, Hwa Soo Kim, Jongwon Kim, "Development of a novel meso-scale vapor compression refrigeration system (mVCRS)," APPLIED THERMAL ENGINEERING, vol. 66, no. 1-2, pp. 453-463, 2014.05.

• Kunchan Seo, Sunme Cho, Taegyun Kim, Jongwon Kim, Hwa Soo Kim, "Design and stability analysis of a novel wall-climbing robotic platform (ROPE RIDE)," MECHANISM AND MACHINE THEORY, vol. 70, no. , pp. 189-208, 2013.12.

• Heeseung Hong, Dongmok Kim, HwaSoo Kim, Seokwoo Lee, Jongwon Kim, "Contact angle estimation and composite locomotive strategy of a stair-climbing mobile platform," ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, vol. 29, no. 5, pp. 367-381, 2013.10.

• Dongkyu Choi, Jongkyun Oh, Jongwon Kim, "Analysis method of climbing stairs with the rocker-bogie mechanism," JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 27, no. 9, pp. 2783-2788, 2013.09.

• Hyunpyo Shin, Sungcheul Lee, Jay. I. Jeong, Jongwon Kim, "Antagonistic Stiffness Optimization of Redundantly Actuated Parallel Manipulators in a Predefined Workspace," TRANSACTIONS ON MECHATRONICS, vol. 18, no. 3, pp. 1161-1169, 2013.06.

• Heeseung Hong, Dongmok Kim, Hwa Soo Kim, Seokwoo Lee, Jongwon Kim, "Contact angle estimation and composite locomotive strategy of a stair-climbing mobile platform," Robotics and Computer-Integrated Manufacturing, vol. 29, no. , pp. , 2013.05.. [PDF]

• Doyoung Chang, Jeongryul Kim, Dongkyu Choi, Kyu-Jin Cho, TaeWon Seo, Jongwon Kim, "Design of a slider-crank leg mechanism for mobile hopping robotic platforms," JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 27, no. 1, pp. 207-214, 2013.01.

• Hee Seung Hong, TaeWon Seo, Dongmok Kim, Sunho Kim, Jongwon Kim, "Optimal design of hand-carrying rocker-bogie mechanism for stair climbing," JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol. 27, no. 1, pp. 125-132, 2013.01.

• Misop Han, Doyoung Chang, Chunwoo Kim, Brian J. Lee, Yihe Zuo, Hyung-Joo Kim, Doru Petrisor, Bruce Trock, Alan W. Partin, Ronald , "Geometric Evaluation of Systematic Transrectal Ultrasound Guided Prostate Biopsy," Journal of Urology, vol. 188, no. 6, pp. 2404-2409, 2012.12.. [PDF]

• Hyunpyo Shin, Sunho Kim, Jayil Jeong, and Jongwon Kim, "Stiffness Enhancement of a Redundantly Actuated Parallel Machine Tool by Dual Support Rims," International Journal of Precision Engineering and Manufacturing (SCIE), vol. 13, no. 9, pp. 1539-1547, 2012.09.

• Donghun Lee, Jongwon Kim and TaeWon Seo, "Optimal design of 6-DOF eclipse mechanism based on task-oriented workspace," Robotica, vol. 30, no. 5, pp. 691-699, 2012.09. [PDF]

• Giuk Lee, Geeyun, Jongwon Kim, and TaeWon Seo, "High-Payload Climbing and Transitioning by Compliant Locomotion with Magnetic Adhesion," Robotics and Autunomous Systems, vol. 60, no. , pp. 1308-1316, 2012.08.31. [PDF]

• Dongmok Kim, Heeseung Hong, Hwa Soo Kim and Jongwon Kim, "Optimal design and kinetic analysis of a stair-climbing mobile robot with rocker-bogie mechanism," Mechanism and Machine Theory, vol. , no. , pp. 90-108, 2012.04.. [PDF]

• Donghun Lee, Doyoung Chang, Young-il Shin, Donghoon Son, Tae-wan Kim, Kyu-Yeul Lee, Jongwon Kim, "Design and Application of Wire-Driven Bidirectional Telescopic Mechanism for Workspace Expansion with a Focus on Shipbuilding Tasks," ADVANCED ROBOTICS, vol. , no. , pp. 699-715, 2011.4.. [PDF]

• Sangrok Jin, Taijong Sung, TaeWon Seo b, Jongwon Kim, "Characteristics of R-123 two-phase flow through micro-scale short tube orifice for design of a small cooling system," Experimental Thermal and Fluid Science, vol. 35, no. 7, pp. 1484-1489, 2011.10.. [PDF]

• Sangrok Jin, Taijong Sung, Jongwon Kim, TaeWon Seo, "Optimal design of a micro-orifice for constant evaporator superheat in a small cooler," Applied Thermal Engineering, vol. 31, no. 14-15, pp. 2631-2635, 2011.10.. [PDF]

• Doyoung Chang, Donghoon Son, Junwoo Lee, Donghun Lee, Tae-wan Kim, Kyu-Yeul Lee and Jongwon Kim, "A new seam-tracking algorithm through characteristic-point detection for a portable welding robot," Robotics and Computer-integrated Manufacturing, vol. 28, no. , pp. 1-14, 2011.08.. [PDF]

• Doyoung Chang, Jeongryul Kim, Dongkyu Choi, Kyu-Jin Cho, TaeWon Seo, and Jongwon Kim, "Design of a Slider-Crank leg Mechanism for Mobile Hopping Robotic Platform," Journal of Mechanical Science and Technology, vol. , no. , pp. , 2011.08.. [PDF]

• Hee Seung Hong, TaeWon Seo, Dongmok Kim, Sunho Kim, and Jongwon Kim, "Optimal Design of Hand-Carrying Rocker-Bogie Mechanism for Stair Climbing," Journal of Mechanical Science and Technology, vol. , no. , pp. , 2011.06.. [PDF]

• Donghun Lee, Namkug Ku, Tae-Wan Kim, Jongwon Kim, Kyu-Yeul Lee, Youg-Shuk Son, "Development and application of an intelligent welding robot system for shipbuilding," Robotics andComputer-IntegratedManufacturing, vol. 27, no. 2, pp. 377-388, 2011.04.. [PDF]

• Hyunpyo Shin, Sungcheul Lee, Woosung In, Jay.I.Jeong, Jongwon Kim, "Kinematic Optimization of a Redundantly Actuated Parallel Mechanism for Maximizing Stiffness and Workspace Using Taguchi Method," Journal of Computational and Nonlinear Dynamics, vol. 6, no. 1, pp. , 2011.01.. [PDF]

• Kihan Shin, Sungcheol Lee, Hyunpyo Shin, Youngsun Yoo and Jongwon Kim, "Coupled Linkage System Optimization for Minimum Power Consumption," Journal of Mechanical Science and Technology, vol. 26, no. 4, pp. 1099-1106, 2011.01. [PDF]

• Donghun Lee, Namkuk Ku, Tea-Wan Kim, Kyu-Yeul Lee, Jongwon Kim, Sooho Kim, "Self-traveling robotic system for autonomous abrasive blast cleaning in double-hulled structures of ships," Automation in Construction, vol. 19, no. 8, pp. 1076-1086, 2010.10.. [PDF]

• Keyhwan Kim, Sungcheul Lee, Kyoubum Kim, Kyu-yeul Lee, Seungjin Heo, Kihong Park, Jay-il Jeong and Jongwon Kim, "Development of the end-effector measurement system for a 6-axis welding robot," International Journal of Precision Engineering and Manufacturing, vol. 11, no. 4, pp. 519-526, 2010.08.. [PDF]

• D. Jeon, K. Kim, J.I. Jeong, J.Kim, "A calibration method of redundantly actuated parallel mechanism machines," CIRP Annals-MANUFACTURING TECHNOLOGY, vol. 59, no. 1, pp. 413-416, 2010.08.. [PDF]

• Sungcheul Lee, Woosung In, Sitae Kim, Moonki Kim, Jay I. Jeong, and Jongwon Kim, "Experimental verification of antagonistic stiffness planning for a planar parallel mechanism with 2-DOF force redundancy," Robotica, vol. , no. , pp. , 2010.08.. [PDF]

• Keyhwan Kim, Sungcheul Lee, Kyoubum Kim, Kyu-yeul Lee, Seungjin Heo, Kihong Park, Jay-il Jeong, Jongwon Kim, "Development of the End-effector Measurement System for a 6-axis Welding Robot," INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol. 11, no. 4, pp. 519-526, 2010.08.. [PDF]

• Keyhwan Kim, Sungcheul Lee, Kyoubum Kim, Kyu-yeul Lee, Seungjin Heo, Kihong Park, Jay-il Jeong and Jongwon Kim, "Development of the end-effector measurement system for a 6-axis welding robot," International Journal of Precision Engineering and Manufacturing, vol. 11, no. 4, pp. 519-526, 2010.08.

• Namkug Ku, Ju-hwan Cha, Kyu-Yeul Lee, Jongwon Kim, Tae-wan Kim, Sol Ha, Donghun Lee, "Development of a mobile welding robot for double-hulled structures in shipbuilding," Journal of Marine Science and Technology, vol. 15, no. 4, pp. 374-385, 2010.07.. [PDF]

• Sangyong Lee, Munsang Kim, Jongwon Kim, Mun-Taek Choi, "Receding horizon viability radius for stability of humanoid robot under external perturbation," Journal of Mechanical Science and Technology , vol. 24, no. 5, pp. 1127-1139, 2010.05.. [PDF]

• Donghoon Son, Dongsu Jeon, Woo Chul Nam, Doyoung Chang, TaeWon Seo, Jongwon Kim, "Gait planning based on kinematics for a quadruped gecko model with redundancy," Robotics and Autonomous Systems, vol. 58, no. 5, pp. 648-656, 2010.05.. [PDF]

• Donghoon Son, Dongsu Jeon, Woo Chul Nam, Doyoung Chang, TaeWon Seo and Jongwon Kim, "Gait planning based on kinematics for a quadruped gecko model with redundancy," Robotics and Autonomous Systems, vol. 58, no. 5, pp. 648-656, 2010.05.. [PDF]

• Oh, Min-jae, Lee, Sang-Moo, Kim, Tae-wan, Lee, Kyu-Yeul, Kim, Jongwon, "Design of a teaching pendant program for a mobile shipbuilding welding robot using a PDA," COMPUTER-AIDED DESIGN, vol. 42, no. 3, pp. 173-182, 2010.03.. [PDF]

• Min-jae Oh, Sang-Moo Lee, Tae-wan Kim, Kyu-Yeul Lee, Jongwon Kim, "Design of a teaching pendant program for a mobile shipbuilding welding robot," Computer-Aided Design, vol. 43, no. 3, pp. 173-182, 2010.03.. [PDF]

• Donghun Lee, Sungcheul Lee, Namkuk Ku, Chaemook Lim, Kyu-Yeul Lee, Taewan Kim, and Jongwon Kim, "Development of a mobile robotic system for working in the double-hulled structure of a ship," Robotics and Computer Integrated Manufacturing, vol. 26, no. 1, pp. 13-23, 2010.02.. [PDF]

• Taewon Seo, Woosung In, Jongwon Kim, "A new planar 3-DOF parallel manipulator with continuous 360-degree spinning capability," Journal of Mechanical Science and Technology (KSME), vol. 23, no. 11, pp. 3088-3094, 2009.11.. [PDF]

• Woochul Nam, TaeWon Seo, Byungwook Kim, Dongsu Jeon, Kyu-Jin Cho, and Jongwon Kim, "Kinematic analysis and experimental verification on the locomotion of gecko," Journal of Bionic Engineering, vol. 6, no. 3, pp. 246-254, 2009.10.. [PDF]

• Taijong Sung, Daesik Oh, Sangrok Jin, Tae Won Seo, Jongwon Kim , "Optimal Design of a Micro Evaporator with Lateral Gaps," Appleid Thermal Engineering, vol. 29, no. 15, pp. 2921-2926, 2009.10.. [PDF]

• Tae Won Seo, Hwa Soo Kim, Deuk Soo Kang, Jongwon Kim, "Dual servo control of a 3-DOF High-tilt Micro Parallel Positioning Platform," IEEE/ASME transaction on mechatronics, vol. 14, no. 5, pp. 615-625, 2009.10.. [PDF]

• Sunho Kim, Woosung In, Dongsu Jeon, Hyunpyo Shin, Jongwon Kim, "Design and Analysis of Decoupled Parallel Mecahnism with Redundant Actuator," International Journal of Precision Engineering and Manufacturing (SCIE), vol. , no. , pp. 93-99, 2009.10. [PDF]

• Woochul Nam, TaeWon Seo, Byungwook Kim, Dongsu Jeon, Kyu-Jin Cho, Jongwon Kim, "Kinematic Analysis and Experimental Verification on the Locomotion of Gecko," Journal of Bionic Engineering, vol. 6, no. 3, pp. 246-254, 2009.09.. [PDF]

• HEONYOUNG LIM,YEONSIK KANG, JOONGJAE LEE, JONGWON KIM,and BUM-JAE YOU, "SOFTWARE ARCHITECTURE AND TASK DEFINITION OF A MULTIPLE HUMANOID COOPERATIVE CONTROL SYSTEM," International Journal of Humanoid Robotics , vol. 6, no. 2, pp. 173-203, 2009.06. [PDF]

• Dongmok Kim, Jongwon Kim, Kyouhee Lee, Cheolgyu Park, Jinsuk Song and Deuksoo Kang, "Excavator tele-operation system using a human arm," Automation in Construction, vol. 18, no. 2, pp. 173-182, 2009.03.. [PDF]

• Xin-Jun Liu, Jinsong Wang, Chao Wu and Jongwon Kim, "A New Family of Spatial 3-DOF Parallel Manipulators with Two Translational and One Rotational DOFs," Robotica, vol. 27, no. , pp. 241-247, 2009.03.. [PDF]

• Woosung In, Sungcheul Lee, Jay I. Jeong, Jongwon Kim, "Design of a Planar Type High-Speed Parallel Mechanism Positioning Platform with the Capability of 180-degree Orientation," Annals of the CIRP, vol. 57, no. 1, pp. 421-424, 2008.08.. [PDF]

• Hwang Kim, Dongmok Kim, Hojoon Yang, Kyouhee Lee, Kunchan Seo, Doyoung Chang, Prof. Jongwon Kim, "Development of a wall-climbing robot using a tracked wheel mechanism," KSME International Journal , vol. 22, no. 8, pp. 1490-1498, 2008.08.. [PDF]

• Tae Won Seo, Hwa Soo Kim, Deuk Soo Kang, Jongwon Kim, "Gain-Scheduled Robust Control of a 3-DOF Micro Parallel Positioning Platform via a Dual Stage Servo System," Mechatronics, vol. 18, no. 9, pp. 495-505, 2008.04.. [PDF]

• Deuk Soo Kang, Mr. Tae Won Seo, Prof. Jongwon Kim, "Development and kinematic calibration for measurement structure of a micro parallel mechanism platform," KSME International Journal , vol. 22, no. 4, pp. 746-754, 2008.04.. [PDF]

• Ahn, Changsun, Seo, Taewon, Kim, Jongwon, Kim, Tae-wan, "High-tilt parallel positioning mechanism development and cutter path simulation for laser micro-machining ," Computer-Aided Design , vol. 39, no. 3, pp. 218-228, 2007.03.. [PDF]

• Young Man Cho, Ik Kyu Kim, Jong Jin Woo, Hwa Soo Kim, Jongwon Kim, "Fast Design of the QP-based Optimal Trajectory for the Eclipse-II Motion Simulator," KSME International Journal , vol. 21, no. 12, pp. 1973-1985, 2006.10.16.. [PDF]

• D. S. Kang, T. W. Seo, Y. H. Yoon , B. S. Shin, X-J Liu , J. Kim, "A Micro-positioning Parallel Mechanism Platform with 100-degree Tilting Capability," CIRP Annals, vol. 55, no. , pp. 377-380, 2006.08.. [PDF]

• Xinjun Liu, Jinsong Wang, Jongwon Kim, "Determination of the Link Lengths for a Spatial 3-DoF Parallel Manipulator," Journal of Mechanical Design, vol. 128, no. 2, pp. 365-373, 2006.03.. [PDF]

• Xinjun Liu, Jongwon Kim, "A New Spatial Three-DoF parallel Manipulator with High Rotational Capability," Transactions on Mechatronics, vol. 10, no. 5, pp. 502-512, 2005.10.. [PDF]

• Hyonse Kim, Chihyun In, Gilho Yoon, Jongwon Kim, "Design and fabrication of a micro PZT cantilevers array actuator for applications in fluidic systems," KSME International Journal , vol. 19, no. 8, pp. 1544-1553, 2005.08.. [PDF]

• Hyonse Kim, Chihyun In, Gilho Yoon, Jongwon Kim, "A slim type microvalve driven by PZT films," Sensors and Actuators A-Physical , vol. 121, no. 1, pp. 162-171, 2005.05.. [PDF]

• Kun-Ku Oh, Xin-Jun Liu, Deuk Soo Kang, and Jongwon Kim , "Optimal design of a micro parallel positioning platform. Part II: Real machine design," Robotica , vol. 23, no. 1, pp. 109-122, 2005.01.. [PDF]

• Kun-Ku Oh, Xin-Jun Liu, Deuk Soo Kang, Jongwon Kim , "Optimal Design Of A Micro Parallel Positioning Platform. Part I:Kinematic Analysis," Robotica, vol. 22, no. 6, pp. 599-609, 2004.11.. [PDF]

• Xin-Jun Liu, Jinsong Wang, Kun-Ku Oh, and Jongwon Kim , "A New Approach to the Design of a DELTA Robot with a desired workspace ," Journal of Intelligent & Robotic Systems , vol. 39, no. 2, pp. 209-225, 2004.02.. [PDF]

• Jay il Jeong, Dongsoo Kang, Young Man Cho, and Jongwon Kim, "Kinematic Calibration for redundantly actuated parallel mechanism," Journal of Mechanical Design-Transaction of ASME, vol. 126, no. 2, pp. 307-318, 2004.02.. [PDF]

• Sin Young Lee, Jong Won Kim, Jang Moo Lee, Gyoo Beom Kim , "Chatter Analysis of a Parallel Mechanism-Based Universal Machining Center," KSME International Journal, vol. 17, no. 5, pp. 691-697, 2003.5.. [PDF]

• Xin-Jun Liu , Jay il Jeong, Jongwon Kim , "A Three Translational DoFs Parallel Cube-Manipulator," Robotica , vol. 21, no. 6, pp. 645-653, 2003.12.. [PDF]

• Jongwon Kim, Young man Cho, Frank C. Park, Jang Moo Lee , "Design of a Parallel Mechanism Platform for Simulating Six Degrees-of-freecom General Motion Including Continuous 360-degree Spin," CIRP Annals, vol. 52, no. 1, pp. 347-350, 2003.08.. [PDF]

• Junghoon Hur, Kunwoo Lee, Zhu-hu, Jongwon Kim , "Hybrid Rapid Prototyping System using Machining and Deposition," Computer-Aided Design, vol. 34, no. 10, pp. 741-754, 2002.09.. [PDF]

• Chanhee Han, Jinwook Kim, Jongwon Kim, F.C. Park , "Eclipse-II: A New Parallel Mechanism Enabling Continuous 360-degree Spinning Plus Three-axis Translational Motions," Mechanism and Machine Theory , vol. 37, no. 8, pp. 787-798, 2002.08.. [PDF]

• Chanhee Han, Jinwook Kim, Jongwon Kim, F.C. Park , "Eclipse-II: A New Parallel Mechanism Enabling Continuous 360-degree Spinning Plus Three-axis Translational Motions," Mechanism and Machine Theory , vol. 37, no. 8, pp. 787-798, 2002.08.. [PDF]

• Jongwon Kim, Jae-Chul Hwang, Jin-Sung Kim, Cornel C. Iurascu,F.C. Park and Young Man Cho, "Eclipse-II: A New Parallel Mechanism Enabling Continuous 360-degree Spinning Plus Three-axis Translational Motions," IEEE Transactions on Robotics and Automation, vol. 18, no. 3, pp. 367-373, 2002.06.. [PDF]

• J Kim, K S Cho, J C Hwang, C C Iurascu, F C Park , "Eclipse-RP: a new RP machine based on repeated deposition and machining," Proceedings of the Institution of Mechanical Engineers K-Journal of Multi-body Dynamics , vol. 216, no. 1, pp. 13-20, 2002.03.. [PDF]

• Saligrama. R. Venkatesh, Young Man Cho and Jongwon Kim , "Robust control of vertical motions in ultra-high rise elevators," Control Engineering Practice , vol. 10, no. 2, pp. 121-132, 2002.02.. [PDF]

• Chanhee Han, Jinwook Kim, Jongwon Kim, F.C. Park, "Kinematic sensitivity analysis of the 3-UPU parallel mechanism," Mechanism and Machine Theory, vol. 37, no. 8, pp. 787-798, 2002. 08.. [PDF]

• Jongwon Kim, F.C. Park, S.J. Ryu, Jinwook Kim, Jaechul Hwang, Changbeom Park, Cornel Iurascu, "Design and Analysis of a Redundantly Actuated Parallel Mechanism for Rapid Machining," IEEE Transactions on Robotics and Automation, vol. 17, no. 4, pp. 423-434, 2001.08. [PDF]

• Jongwon Kim, Jae-Chul Hwang,Jin-Sung Kim, F.C.Park and Young Man Cho , "Eclipse-II : A New Parallel Mechanism Enabling Continuous 360-degree Spining Plus Three-axis Translational Motion," IEEE International Conference on Robotics and Automation , vol. , no. , pp. , 2001.05.. [PDF]

• Jinwook Kim, Changbeom Park, Jongwon Kim, and F.C.Park , "Performance analysis of parallel manipulator architectures for CNC machining," Journal of Manufacturing Science and Engineering-Transaction of ASME , vol. 122, no. 4, pp. 753-759, 2000.11.. [PDF]

• Kiha Lee, Jongwon Kim , "Controller gain tuning of a simultaneous multi-axis PID control system using the Taguchi method," Control Engineering Practice , vol. 8, no. 8, pp. 949-958, 2000.08.. [PDF]

• Sangkun Park, Kunwoo Lee, Jongwon Kim, Jongwoo Park , "A System for Rapid Design and Manufacfuring of Custom-Tailed Shoes," KSME International Journal , vol. 14, no. 6, pp. 675-689, 2000.06.. [PDF]

• Junghoon Hur, Jongwon Kim, DongChul Han, Chong Nam Chu, Chongwoo Park, and Kunwoo Lee , " Development of Hybrid Rapid Prototyping System-Hardware and Software ," 3rd. World Congress on Intelligent Manufacturing Processes & Systems , vol. , no. , pp. 223-226, 2000.06.

• J. H. Cho, J. W. Kim, K. Kim , "CNC tool path planning for multi-path sculptured surfaces," International Journal of Production Research , vol. 38, no. 7, pp. 1677-1687, 2000.05.. [PDF]

• Jonghun Park, Jinwoo Park, Jongwon Kim , "A generic event control framework for modular flexible manufacturing system," Computers & Industrial Engineering , vol. 38, no. 1, pp. 107-123, 2000.01.. [PDF]

• Tae-Yong Kim, Joongwon Woo, Dongwon Shin, Jongwon Kim , "Indirect cutting force measurement in multi-axis simultaneous NC milling processes," International Journal of Machine Tools & Manufacture , vol. 39, no. 11, pp. 1717-1731, 1999.11.. [PDF]

• J. Kim, F. C. Park, J. M. Lee , "A New Parallel Mechanism Machine Tool Capable of Five-Face Machining," CIRP Annals , vol. 48, no. 1, pp. 337-340, 1999.01.. [PDF]

• Dongwon Shin, Jongwon Kim , "Design and implementation of PCB-type capacitance displacement sensor collocated with magnetic bearing," Sensors and Actuators A-Physical , vol. 71, no. 3, pp. 223-229, 1998.12.. [PDF]

• Yongbin Park, Tae-Yong Kim, Joonwon Woo, Dongwon Shin, Jongwon Kim , "Sliding Mode Cutting Force Regulator for Turning Processes," International Journal of Machine Tools & Manufacture , vol. 38, no. 8, pp. 911-930, 1998.08.. [PDF]

• Inhaeng Cho, Kunwoo Lee and Jongwon Kim , "Generation of Collision-Free Cutter Location Data in Five-Axis Milling Using the Potential Energy Method," International Journal of Advanced Manufacturing Technology , vol. 13, no. 8, pp. 523-529, 1997.08.. [PDF]

• Tae-Yong Kim, Jongwon Kim , "Adaptive Cutting Force Control for a Machining Center by Using Indirect Cutting Force Measurements," International Journal of Machine Tools & Manufacture , vol. 36, no. 8, pp. 925-937, 1996.08.. [PDF]

• Joongwon Woo, Jonwon Kim, Ha-Young Park , "Design and Implementation of an Automatic Material Handling System in a Batch Production Environment," KSME International Journal , vol. 9, no. 4, pp. 452-461, 1995.12.. [PDF]

• J.M.Lee, D.K.Choi, J.Kim, and C.N.Chu , "Real-Time Tool Breakage Monitoring for NC Milling Process," CIRP Annals , vol. 44, no. 1, pp. 56-62, 1995.01.. [PDF]

• D.C.Han, S.S.Park, W.J.Kim, J.Kim , "A study on the Characteristics of Externally Pressurized Air Bearings ," Journal of ASPE , vol. 16, no. 3, pp. 164-173, 1994.. [PDF]

• Doyoung Chang, Jeongryul Kim, Dongkyu Choi, Kyu-Jin Cho, TaeWon Seo, Jongwon Kim, "Design of a Crank-Slider Leg Mechanism for Mobile Hopping Robotic Platforms," KSME, vol. 27, no. 1, pp. 207-214, . [PDF]

• Dongkyu Choi, Jongkyun Oh, Jongwon Kim, "Analysis Method of Climbing Stairs with the Rocker-Bogie Mechanism," KSME, vol. 27, no. 9, pp. 2783-2788, . [PDF]